Elevator oil cup Universal elevator parts square cotton thread oil cup oil box car guide rail oil pot

Tongli oil cup new square oil cup woolen cup elevator oil cup woolen small square cup oil box elevator accessories

Common installation methods and steps for elevator oil cups:
Preparation
Confirm that the model and specifications of the oil cup are compatible with the elevator guide rails.
Prepare the tools required for installation, such as wrenches, screwdrivers, etc.
Installation steps
Determine the installation location: Usually the oil cup is installed on the side of the elevator guide rail, generally at the lower end of the guide rail, at a certain height from the ground, for easy refueling and inspection. The specific location may vary depending on the elevator model and installation requirements, but make sure that the oil cup will not interfere with other parts of the elevator after installation.
Fix the oil cup bracket: If the oil cup is equipped with a special bracket, first install the bracket on the guide rail with bolts or other fixings. Use tools such as wrenches to tighten the bolts to ensure that the bracket is firmly installed and will not shake.
Install the oil cup: Place the oil cup on the bracket so that it is in a stable state. Some oil cups may be fixed to the bracket by clamps, clips or screws. Install them according to the design requirements of the oil cup to ensure that the oil cup is installed tightly and does not leak oil.

Function:
Storing lubricating oil: The oil cup is used to store an appropriate amount of lubricating oil to provide a continuous source of oil for the lubrication of the elevator guide rails. It can ensure that within a certain period of time, even if the elevator runs frequently, there is enough lubricating oil to maintain the good lubrication state of the guide rails.
Quantitative oil supply: Through a specific device or design, the oil cup can control the outflow of lubricating oil and realize quantitative oil supply. This ensures that the guide rails are properly lubricated, and there will be no waste and pollution due to excessive oil, nor will the lubrication effect be affected by insufficient oil, thereby extending the service life of the guide rails and other related parts of the elevator.
Uniform lubrication: The oil cup is usually installed on the side of the guide rail, and the position and design of its oil outlet enable the lubricating oil to be evenly distributed on the surface of the guide rail. This helps to form a uniform oil film between the guide rail and the slider or guide shoe during the operation of the elevator, reduce friction resistance, reduce component wear, and ensure the smoothness and comfort of the elevator operation.